Pumps in reverse osmosis filter, accessories and spare parts

The pumps increase the pressure (diaphragm booster pump) filter reverse osmosis and reverse osmosis components for pumps. The pumps are constructed in the normal way on the basis of a DC motor. Water is also part of the standard - three chambers with pistons and valves group. Most components are also interchangeable products within peers from different manufacturers.

In the category of sets presented pomp, pump reverse osmosis, sensors high and low pressure, power supply units, pump head, diaphragm, valve blocks, pistons, cams assembly, solenoids, valves, automatic washing controllers.

 Booster pump type is arranged as follows.

 DC motor transmits rotational force to the cam drive unit; drive unit, in turn, converts rotational force into reciprocating engine - a reciprocating motion of the pistons in the three chambers of the valve block at a time. When the piston moves downward in the portion of each chamber is sucked through the water inlet valve, the upward - ejected through the outlet valve. When the operating speed of the engine, these portions of water successively from each of the chambers merge into one stream. Water separates from the power of the diaphragm - seal.

  In most pumps to prevent the possibility of exceeding the maximum pressure relief valve is provided in each chamber (spring loaded cone). In modern pumps, automatic bypass is integrated in the pump head.

Pump performance is dependent on several factors: the speed and power of the engine, the size of cameras, the stroke length of the pistons, the fluid viscosity.

Buy pump reverse osmosis can place an order on our website or contact us in any convenient way for you.