Vontron ULP 2012-100 membrane in the reverse osmosis filter, China

Excellent membrane performance from one of the largest manufacturers of membrane elements and membrane sheet. Vontron Technology Co., Ltd. It is unlike most other brand name of the manufacturer of a full cycle. The membrane envelope and membrane from the factory to the consumer Vontron known under a variety of other brands. Meet the membrane Vontron as possible in the budget reverse osmosis filters, and systems of premium - class.

  Abbreviation ULP means Ultra-Low Pressure Compound RO Membrane Element, low pressure membrane (compared with industrial membrane elements).

Main characteristics of the membrane element Vontron ULP1812-100:

Type membrane sheet: PolyamideThin-Film Composite (TFC)

Design: Sprial wound with tape outer wrap
The active area of ​​the membrane: 5 ft 2 (0.46 m 2)
The average yield of permeate: 100 GPD (0.38 m 3 / day)
Stable filtration rating: 97.5%
Compatible with standard housings membranes 1812, 2012
Supply dry cell (without liquid preservative)
Porosity: 0.0001 microns
The diameter of the coil element 2 "(46 mm)
The length of the rod 12 "(305mm)

Operating characteristics of the membrane Vontron ULP1812-100:
Operating pressure: 60 psi
Max. operating pressure: 300 psi (2.07 Mpa)
Max. incoming water temperature: 45 ℃
Max. sdi Inlet: 5
The concentration of free chlorine Inlet: <0.1ppm
PH Range Inlet during continuous operation: 3 ~ 10
Inlet PH range during the chemical treatment: 2 ~ 12
Max. pressure drop across the membrane of 10 psi (0.07 Mpa)

Buy a reverse osmosis membrane Vontron ULP1812-100 you can place your order on our website or contact us in any convenient way for you.