Jaco fitting reverse osmosis threaded

Threaded fittings for reverse osmosis filter.

Fittings type JACO almost completely superseded by modern standards Quick connections John Guest. However, many systems assembled with fittings JACO, remain in operation.

The main drawback of these compounds - long time to the assembly site - with success is compensated by high reliability and durability.

Instructions for assembly unit JACO

1. Trim the end of the tube evenly and remove the inner and outer irregularities.

2. Insert the tube through the nut into the fitting body until it stops. If the tube enters the nut with difficulty, loosen the nut on one turn, and then insert the tube again to stop the tube deep into the fitting body.

3. Tighten the nut finger tight as possible.

4. Hold on key nut another 1 - 2 turns.

5. The assembly of assembly should be performed at room temperature.

NOTE: To assemble the unit not necessary to remove the nut from the fitting sufficiently loosen the nut by unscrewing it in a few turns. Possible creaking at Reaching the nut does not indicate a defect or malfunction; this is normal.
Buy Fittings RO Jaco, you can place your order on our website or contact us in any convenient way for you.